n 近年部分发表论文【第一作者、通信作者及第二作者（指导学生第一作者）】 1. Xu S, Yin B, Li Z, Dong F*. A review on gas purge of proton exchange membrane fuel cells: Mechanisms, experimental approaches, numerical approaches, and optimization[J]. Renewable and Sustainable Energy Reviews, 2023, 172: 113071. 2.Xu S, Yin B, Dong F*. Lattice Boltzmann simulation of ice droplet melting process and motion behavior in gas diffusion layer of proton exchange membrane fuel cell under thermal purging[J]. Ionics, 2023, 29: 1553–1569. 3. Yin B, Zhang X, Xu S, et al. Numerical Simulation of Liquid Water Transport in a Multiperforated Gas Diffusion Layer of Polymer Electrolyte Membrane Fuel Cells[J]. Journal of Energy Engineering, 2023, 149(2): 4023005. 4. Gu H, Yin B*, Yu Y, et al. Energy Management Strategy Considering Fuel Economy and Life of Fuel Cell for Fuel Cell Electric Vehicles[J/OL]. Journal of Energy Engineering, 2023, 149(1): 4022054. 5.Yin B, Chen Z, Xu S, et al. Effects of fractal network channel on heat and mass transfer in methanol steam reforming[J]. International Journal of Hydrogen Energy, 2022, 47(82): 34810-34824. 6.Chen Z, Jian Y, Yan J, Dong F, Yin B*. A numerical comprehensive evaluation of a micro-type plate autothermal methanol steam reformer with different channel configurations[J]. Chemical Engineering Science, 2022, 262: 118006. 7. Yin B, Xu S, Jia H, et al. Effect of shape parameters on the enhancement of ice-melting performance in a novel perforated gas diffusion layer of proton exchange membrane fuel cell [J]. International Communications in Heat and Mass Transfer, 2022, 136: 106171. 8. Yin B, Xu S, Jia H*, et al. A novel dynamic contact angle model of lattice Boltzmann method for water droplet impact on proton exchange membrane fuel cell channel surface [J]. International Journal of Energy Research, 2022, 46(7): 9851-9862. 9.Ji W, Yan X, Yu S, Yin B*, et al. Experimental Study on the Non-Circular Orifice Effect on Spray and mixing Characteristics of GDI Injectors[J]. Atomization and Sprays, 2022, 32(1): 1-13. 10.Yin B*, Ye Z, Yu S, Jia H, et al. Experimental Study on the Penetration of Diesel and Biodiesel Spray Liquid Emerging from an Equilateral Triangular Orifice under Evaporative Conditions[J]. Journal of Thermal Science, 2022: 1-10. 11. Yin B*, Xu B, Jia H, et al. Experimental research on the frictional performance of real laser-textured cylinder liner under different lubrication conditions[J]. International Journal of Engine Research, 2022, 23(4): 693-704. 12.Xu B, Yin B*, Jia H, et al. Effects of Liner Surface Textures on the Tribological Performance of Different Production Piston Rings[J]. Lubrication Science, 2022, 34(5): 356-368. 13.Xu B, Yin B*, Gao D, et al. Tribological Performance of Surface Treated Piston Assembly with Infiltrated Layer[J]. Journal of Mechanical Science and Technology, 2022, 36(1): 197-204. 14.Xu B, Yin B*, Jia K, et al. Adaptability of laser textured liner to the effects of methanol diluting oil on the tribological properties[J]. International Journal of Automotive Technology, 2022, 23(2): 461-470. 15. Xu B, Yin B*, Jia H, et al. Experimental research on the wall-wetting effects on the frictional property of the cylinder liner–piston ring pair[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2022, 236(4): 721-731. 16. Kuang X, Yin B*, Yang X, et al. Study of the tribological properties of nano lubricating oil blends for diesel engines[J]. Nano Futures, 2022, 6(1): 015002. 17. Kuang X, Yin B*, Yang X, et al. Study of dispersion stability and wear property of lubricating oil blends added with nanographene for a diesel engine[J]. Lubrication Science, 2022, 34(5): 291-302. 18. Kuang X, Yin B*, Wang J, et al. Dispersion stability and wear properties of nano-CeO2 as lubricating oil additives for engines[J]. Industrial Lubrication and Tribology, 2022, 74(7): 813-819. 19. Xu B, Qiu Y, Yin B*, et al. Influence of Different Modified Gears on the Vibration and Noise of Electric Vehicle Reducer[J]. International Journal of Acoustics and Vibration, 2021, 26(4): 325-336. 20.Yu S, Yin B*, Bi Q, et al. Experimental and numerical investigation on inner flow and spray characteristics of elliptical GDI injectors with large aspect ratio[J]. Energy, 2021, 224: 120119. 21.Yu S, Yin B*, Bi Q, et al. Experimental and numerical investigation on inner flow and spray characteristics of elliptical GDI injectors with large aspect ratio[J]. Energy, 2021, 224: 120119. 22.Yu S, Yin B*, Bi Q, et al. Effects of gasoline and ethanol on inner flows and swallowtail-like spray behaviors of elliptical GDI injector[J]. Fuel, 2021, 294: 120543. 23.Yu S, Yin B*, Jia H, et al. Investigation of inner cavitation and nozzle exit flow patterns for elliptical orifice GDI injectors with various aspect ratios[J]. International Communications in Heat and Mass Transfer, 2021, 129: 105682. 24.Yu S, Yin B*, Bi Q, et al. The influence of elliptical and circular orifices on the transverse jet characteristics at supersonic crossflow[J]. Acta Astronautica, 2021, 185: 124-131. 25.Xu B, Yin B*, Li Q, et al. Tribological performance of self‐lubricating polyurethane elastomer compounding with the modified ultra‐high molecular weight polyethylene[J]. Polymer Engineering & Science, 2021, 61(7): 2033-2042. 26. Yin B*, Xu B, Jia H, Yu S. et al. The effect of elliptical diesel nozzles on spray liquid-phase penetration under evaporative conditions[J]. Energies, 2020, 13(9): 2234. 27. Yin B*, Xu S, Yang S, et al. Influence of Microelliptical Groove Gas Diffusion Layer (GDL) on Transport Behavior of Proton Exchange Membrane Fuel Cell (PEMFC) [J]. International Journal of Heat and Mass Transfer, 2021, 180: 121793. 28. Yin B*, Xu S, Yang S, et al. Shape Optimization of a Microhole Surface for Control of Droplet Wettability via the Lattice Boltzmann Method and Response Surface Methodology [J]. Langmuir, 2021, 37(12): 3620-3627. 29. Yin B*, Xie X, Xu S, et al. Effect of pillared surfaces with different shape parameters on droplet wettability via Lattice Boltzmann method [J]. Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2021, 615: 126259. 30. Xie X, Yin B*, Xu S, et al. Influence of perforated gas diffusion layer micropore shape parameters on water removal in a proton exchange membrane fuel cell flow channel [J]. International Journal of Energy Research, 2021, 45(10): 14630-14613. 31. Kuang X, Yin B*, Xu B, et al. Effects of diesel fuel nano-additives on friction and wear properties of precision coupled parts of a diesel engine fuel injection system[J]. Tribology Transactions, 2021, 64(1): 21-30. 32. Yin B*, Kuang X, Xu B, et al. Experimental study on the tribological behaviour of CeO2 Diesel blends on the injector body[J]. Lubrication Science, 2020, 32(6): 283-291. 33.解玄,尹必峰*,陈诗越,等. 激光作用时间变化下毛化织构表面成形机理与演变规律[J].中国表面工程,2021,34(05):169-180. 34.佟德辉,尹必峰*,徐波,等.缸套表面分区差异织构的润滑摩擦性能研究[J].内燃机学报,2021,39(05):451-458. 35.徐波,尹必峰*,贾和坤,等. 燃油稀释低黏度机油对柴油机缸套活塞环润滑性能的影响[J].农业工程学报,2021,37(11):60-66. 36. Xie X, Yin B*, Xu S, et al. Effects of microstructure shape parameters on water removal in a PEMFC lotus-like flow channel [J]. International Journal of Hydrogen Energy, 2020, 47(5): 3473-3483. 37. Yin B*, Xu B, Jia H, Yu S. et al. The effect of elliptical diesel nozzles on spray liquid-phase penetration under evaporative conditions[J]. Energies, 2020, 13(9): 2234. 38. Yu S, Yin B*, Deng W, et al. Experimental study on the spray and mixing characteristics for equilateral triangular and circular nozzles with diesel and biodiesel under high injection pressures[J]. Fuel, 2019, 239: 97-107. 39. Yu S , Yin B*, Deng W , et al. An experimental comparison of the elliptical and circular nozzles spray and mixing characteristics under different injection pressures[J]. Fuel, 2019, 236:1474-1482. 40. Yu S, Yin B*, Deng W, et al. Computational Analysis of Flow Patterns in Elliptical Diesel Nozzles at High Injection Pressures[J]. Atomization and Sprays, 2018, 28(11). 41. Yu S, Yin B*, Deng W, et al. Numerical Investigation on Effects of Elliptical Diesel Nozzle on Primary Spray Characteristics by Large Eddy Simulation (LES)[J]. Atomization and Sprays, 2018, 28(8). 42. Yu S , Yin B*, Deng W, et al. Experimental study on the diesel and biodiesel spray characteristics emerging from equilateral triangular orifice under real diesel engine operation conditions[J]. Fuel, 2018, 224:357-365. 43. Yu S , Yin B*, Deng W, et al. Experimental study on the spray characteristics discharging from elliptical diesel nozzle at typical diesel engine conditions[J]. Fuel, 2018, 221:28-34. 44. Yu S , Yin B*, Deng W, et al. Internal flow and spray characteristics for elliptical orifice with large aspect ratio under typical diesel engine operation conditions[J]. Fuel, 2018, 228:62-73. 45. Yin B*, Gao D, Sun S, et al. Research on the profile design of surface texture in piston ring of internal combustion engine[J]. Journal of Tribology, 2018, 140(6): 061701. 46. Yin B*, Xu B, Qian Y, et al. Lubrication adaptability to the variations of combustion modes by texturing cylinder liner in engines[J]. Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, 2018, 232(7): 946-957. 47. Yin B*, Xu B, Jia H, et al. Effects of the array modes of laser-textured micro-dimples on the tribological performance of cylinder liner–piston ring[J]. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2018, 232(7): 871-881. 48. Yin B*, Zhou H, Xu B, et al. The influence of roughness distribution characteristic on the lubrication performance of textured cylinder liners[J]. Industrial Lubrication and Tribology, 2018. 49. Yu S, Yin B*, Wen S, et al. Experimental Investigation on the Early Stage Spray Characteristics with Biodiesel and Diesel[C]//Ilass Europe. 28th european conference on Liquid Atomization and Spray Systems. Editorial Universitat Politècnica de València, 2017: 473-479. 50. Yu S, Yin B*, Jia H, et al. Numerical research on micro diesel spray characteristics under ultra-high injection pressure by Large Eddy Simulation (LES)[J]. International Journal of Heat and Fluid Flow, 2017, 64:129-136. 51. Yin B*, Sun S, Wang B, et al. Numerical Research on Tribological Performance of Textured Liner Surface Under Different Combustion Modes[J]. Journal of Engineering for Gas Turbines & Power, 2017, 1(1). 52. Xu B, Yin B*, et al. Wall-wetting Effects on the Tribological Performance of Cylinder liner-piston ring in Diesel Engines[J]. 2017. 53. Yin B*, Yu S, Jia H, et al. Numerical research of diesel spray and atomization coupled cavitation by Large Eddy Simulation (LES) under high injection pressure [J]. International Journal of Heat & Fluid Flow, 2016, 59:1-9. |
